NexusRig Apex Ready-to-Race Pro Bundle – Cockpit, Seat, Monitor Stand, NexusDrive Elite Pro (25 Nm), Wheel & Pedals + Shifter

NexusRig Apex Ready-to-Race Pro bundle: overview

The NexusRig Apex Ready-to-Race Pro bundle is a complete racing simulator in one order: the NexusRig Apex cockpit, an integrated monitor stand, a GT fixed fibreglass seat, the NexusDrive Elite Pro (25 Nm) direct drive base, the NexusWheel Open 310 steering wheel and a 200 kg load cell 3-pedal set plus a dual-mode H-pattern/sequential shifter.

The NexusDrive Elite Pro (25 Nm) delivers 25 Nm with a 22-bit sensor and a very high torque-response motor for deep, detailed immersion.

The Apex cockpit is 2-inch steel, assembles in 30 to 60 minutes and is rock solid up to 30 Nm, with a 130 mm ball-bearing wheel slider, a strengthened pedal plate and a left or right shifter mount. Add a screen and a PC and you are racing.

Who the nexusRig Apex Ready-to-Race Pro bundle is for

Drivers who want everything in one go:

• First serious simulator buyers
• Gift buyers and families
• Commercial venues and training centres
• PC sim racers

Features in detail

NexusRig Apex cockpit

2-inch (51 mm) high-grade steel tubing, 580 mm wide, assembles in 30–60 minutes; nothing between your legs and no wheel side supports needed.

Strengthened pedal plate

Withstands 180 kg of braking without flex; angle and distance adjustable, pre-drilled for the big brands.

Wheel mount with slider

Patented 3-point height/angle adjustment plus 130 mm of ball-bearing slide; the 2-inch tube handles up to 30 Nm.

Left or right shifter mount

Strengthened, with slide and angle adjustment.

Integrated monitor stand

Bolts to the rig, holds screens up to 70 inches, VESA 75–400, height and fore-aft adjust.

GT fixed fibreglass seat

With seat brackets; high-density foam, harness ready.

NexusDrive Elite Pro (25 Nm)

Delivers 25 Nm with a 22-bit sensor and a very high torque-response motor for deep, detailed immersion.

NexusWheel Open 310

Full aluminium open-wheel hub for competitive sim racing.

200 kg load cell pedals

A 3-pedal set with a 200 kg load cell brake.

Dual-mode shifter

Up to 7-speed H-pattern (6 + reverse) or sequential, full metal construction.

Compatibility

PC (the direct drive base is a PC wheel base). Add a screen up to 70 inches on the integrated stand.

Expand with our Apex accessories: triple and quad monitor stands, handbrake mounts, speaker mounts, PC shelf and more.

Choosing and building a sim rig

Rigidity first. A cockpit exists so the force your wheel base produces goes into your hands, not into a flexing frame. Direct drive bases need a stiff front mount; aluminium profile rigs (40 mm and 80 mm extrusion with 8 mm slots) are the stiffest and most adjustable, while steel tube rigs are lighter and quicker to assemble.

Driving position. GT position puts you upright with the pedals low; formula position reclines the seat and raises the pedals. Check whether the cockpit, seat bracket and pedal mount allow the position you want.

Plan the extras. Monitor stands, shifter and handbrake mounts, keyboard trays and PC shelves bolt onto most profile rigs. Planning them up front avoids drilling or re-assembling later.

Setup and use

1. Assemble the Apex cockpit (30–60 minutes).
2. Fit the seat, monitor stand, base (with the motor mount), pedals and shifter.
3. Mount your screen and connect everything to your PC.
4. Install the base and pedal software, calibrate and adjust your driving position.

Care and maintenance

Check bolts after the first week and then monthly. Keep the base vents clear. Wipe the steel with a damp cloth.

Specifications

Cockpit	NexusRig Apex, 2-inch steel, 580 mm wide
Wheel torque capacity	Up to 30 Nm
Wheel base	NexusDrive Elite Pro (25 Nm)
Pedals	3-pedal set, 200 kg load cell brake
Seat	GT fixed fibreglass with brackets
Monitor stand	Integrated, up to 70 in, VESA 75–400
Shifter	Dual-mode H-pattern (7-speed) / sequential

What's in the box

• NexusRig Apex cockpit (2-inch steel chassis, adjustable pedal mount, premium seat sliders, left/right gear shifter mount, angle/slide/height adjustable wheel mount, tools and screws)
• Integrated single monitor stand (up to 70 in)
• NexusDrive Elite Pro (25 Nm) direct drive wheel base
• Universal direct drive motor mount
• GT-style fixed fibreglass seat with seat brackets
• NexusWheel Open 310 steering wheel
• NexusPedal Race 3-pedal set (200 kg load cell)
• NexusShift dual-mode H-pattern / sequential shifter

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Large items such as cockpits, seats and monitor stands can ship in several boxes, customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return.

Warranty

Products bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.